Makita HP2010N 6 Amp 3/4-Inch Hammer Drill

Buy Cheap Makita HP2010N 6 Amp 3/4-Inch Hammer Drill

Buy Low Price From Here Now
6 Amp hammer drill delivers lots of power for extended use. Versatile 2-speed unit has ball and needle bearings for smooth drilling, while variable speed offers controlled starts. Industrial metal gear housing for long-lasting durability. Cordless: No, Rated RPM: 0 - 2,300, Amps: 6, Variable Speed: Yes, Blows Per Minute (BMP): 0 - 46,000, Case Included: Yes
Readmore

Technical Details

- 2-speed gear change for ideal speed and power
- Variable speed switch for easy starting of holes
- Depth gauge for "drop-in" type anchors
- Powerful 6 amp motor for continuous use
- All ball and needle bearings for long tool life
See more technical details

 "tilemans mixer" 2009-04-19
By Marlin Edinger Tile (memphis,TN. and anywhere else they want me.)
I have used makita hp2010n for mixing thinsets and grouts for over 20 years. I have only gone thru 3 of them. The weight is not as bad as other big drills I have used,(and those I gave away).I was talked into buying a lighter model the 2050. I used it for the last 2 years, when when my third 2010 burned up. Somewhat of a mistake, not enough power, and Today april 18th 2009, it died after 2 short years.I'm buying my forth hp2010n on line right now. One thing it and simular hammer/drills of this type can't do is be a real hammer drill, they are all to slow. So buy a hammer drill that takes sds bits etc.I have bosch and makita sds hammer drills they work great. As far as mixing thinsets, grouts for tiling and regular drilling with great power, I haven't found anything on the market I like better. Oh yeah and 5,6,7 days a week for 7 years each. Well you do the math.

 "Makita HP2010N" 2001-12-13
By
I bought the Makita HP2010N back in 1990 and still have and use it today. It has been used extensively in hammer-mode with a 3-5/8" hole saw to cut holes for ceiling pan boxes in oak beams and for overhead drilling on post and beam construction. It will spin a 7/8" X 18" Greenlee Nail Eater in the "High Speed" position repeatedly through 12" solid oak beams with very little effort.
The ½"chuck is very good and when properly tightened, never seems to let the bit slip even under heavy hammering in masonry. This hammerdrill is heavier than the others I currently own and although it has a ¾" masonry capacity, it is slightly slower to complete holes when drilling in hardened concrete, mostly due to the lower impact of the Makita's hammer mechanism. Because of this, I use it mainly for drilling in hollow concrete block, hard wooden beams or metal, where this drill really excels. I wouldn't recommend it for heavy masonry drilling. A rotary hammer is usually a better choice for that type of work, but a hammerdrill such as this one can also do the job satisfactorily sometimes.
The HP2010N is a very rugged and well made tool. During almost twelve years of very hard, on the job use, the only repairs made have been to replace a worn out trigger switch, brushes (due to normal wear) and a damaged power cord.
I would definitely recommend this tool for anyone who is looking for a very durable, long lasting hammerdrill that will only occasionally be used for drilling in masonry.


Images Product

Buy Makita HP2010N 6 Amp 3/4-Inch Hammer Drill Now

Makita HP2050F 6.6 Amp 3/4-Inch Hammer Drill with LED Light

Buy Cheap Makita HP2050F 6.6 Amp 3/4-Inch Hammer Drill with LED Light

Buy Low Price From Here Now
Shock-proof LED light illuminates drilling surface for better visibility. Lightweight, ergonomic tool can be set for rotation only or rotation with hammering. Powerful 6.6 Amp motor zips through long jobs. Cordless: No, Rated RPM: 0 - 2,900, Amps: 6.6, Variable Speed: Yes, Hammering Modes: Rotation Only, Hammering with Rotation, Blows Per Minute (BMP): 0 - 58,000, Case Included: Yes
Readmore

Technical Details

- Built in LED Light illuminates the workpiece for superior visibility
- Conveniently located 2-mode switch allows for fast changes between hammering with rotation and rotation only
- Ergonomic in-line design and palm fitting rubber grip maximizes productivity
- Fully adjustable dial sets proper RPM to match each application
- Lightweight only 5.1 lbs
See more technical details

 "Good Drill" 2008-07-29
By J.Taylor (USA)
This is a great hammer drill for everyday purposes. It has good power and nice features, such as the L.E.D. light. I thought the light was a gimmick at first, but when it was late afternoon and I find myself inside a building with no lights, the light was great. I have tried other hammer drills but for the money you can't beat this one. Of course if you are going to use this tool all day long there are better options. I bought the Makita HP2070F for my all day use Hammer Drill and it is a beast.

 "go buy the milwaukee 5387-22!" 2006-07-18
By Brent L (Los Angeles)
As a long time milwaukee drill fan (and an extremely happy owner of the venerable Milwaukee 5371 2 sp hammer drill from 1984!) I purchased this Makita for an employee at his request - and it was cheaper to boot!



Now, mind you this is a CORDED 2-speed gearcase hammer drill, so when we plugged it in an tried to use a 1-1/8" ship auger in a 2x6 - guess what - the clutch kicked in - THE CLUTCH? nice touch for an underpowered drill - like a small drill like this needs a clutch! This is not a cordless screwdriver - but a "heavy duty" drill.



Looks like a bunch of LAWYERS designed this TOY!



So I pulled out my 5371 milwaukee and instantly blew through the wood. needless to say, the mak went right back into the box and back to Amazon. In exchange, I ordered the NEW version of my drill, the Milwaukee 5387-22 and it is every bit as good as the old one - and in a totally different league than the BLUE TOY from Makita.



As usual, AMAZON was Amazing in the ease of return and fairness factor - thanks Amazon.



my 2 cents!


Images Product

Buy Makita HP2050F 6.6 Amp 3/4-Inch Hammer Drill with LED Light Now