Buy Low Price From Here Now
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes.
The Makita HP1621FK is a Factory Reconditioned 5/8 inch Hammer Drill. The rock hard heavy-duty 5/8 inch hammer drill is exceptionally well balanced and it quickly and efficiently transfers power to the drill bit with the lowest vibration. The innovative forward/reverse change system is for extended service life of carbon brush and the lock-on button for continuous operation. Includes: 5/8 inch Hammer and Case.
Readmore
Technical Details
- 2-mode operation; "rotation only" and "hammering with rotation"- Lightweight (3.7 lbs) with large capacity drilling up to 5/8 inch in concrete
- Large two-finger trigger switch with 360° swivel side handle for added maneuverability
- Rubberized comfort grip for more comfort, control and reduced operator fatigue
- True variable speed for controlled start-up
See more technical details
By R. Reese
Needed a hammer drill for a small amount of work. this was a recond drill. It looked ok and worked fine. I bought it for a good price. Overall happy with this drill but if I had lots of work to do I would have bought a better unit.
By J. Dredd
the chuck on this drill is useless. it sounds like plastic inside and stripped and failed to sufficiantly hold the bit (a small 5/32 tapcon bit) on the first bit i used. After a very long day of tightening the chuck with pliers just to get the job done, the drill smelled like it was burning up too. Had I paid more than $40 for it, iwould be livid, 75-100 tap con holes out of a drill is totally unacceptable. I've been a professional carpenter for +17 years and the tool market has gotten so bad over the years that Makita is the only brand I can usually trust. I sincerely hope that this cheap depot/lowes homeowner model is not a trend for them.
By Brian D. Bannerman (Brentwood, CA)
The drill arrived in like new condition with instructions and carrying case. I used it to drill several holes in concrete and it did the job.
By D. Kishler (Ohio)
Reconditioned drill was like new, case and depth gauge looked new. Very good value, excellent 1/2" drill, good chuck. This is a good drill for home or light commercial work. It is about the same size as my Craftsman 3/8" drill only capable of 1/2" shank drills. Quick shipping / good purchase.
By Larry Spradling
This drill did everything that I needed it to do. It makes drilling into brick or masonry extremely easy. It has a switch from a regular drill to a hammer drill and has a capacity for drill bits up through 1/2". The drill looked as close to new as you can get and still be called refurbished. You won't find a better buy than this.
Images Product
Buy Makita Factory-Reconditioned 5/8" Hammer Drill Kit w/ Light & Case HP1621FK Now
0 comments:
Post a Comment